赔率bet

2L Home

Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

2L inc.

4 Kane Industrial Drive
Hudson, MA 01749
Tel: (978)567-8867
Contact Us
About 2L Catalog Contact Press Resharpening Testimonials Videos
Shopping CartSearchSale

 Square End Mills, Ballnose End Mills, Downcut End Mills for Cutting Plastic & Wood

Solid Carbide Upcut and Downcut End Mills for Cutting Wood and Plastic


 Plastic and Wood Cutting End Mills for Improved Finish, Prevent Workpiece Lifting

Upcut End Mills & Down Cut End Mills for Wood/Plastic
  • Upcut End Mills for Cutting Plastic and Wood provide maximum chip clearance for chip evacuation to prevent chips from sticking or packing in the flutes.
        - Use Single Flute for maximum chip clearance.
        - Use Two Flutes for higher feed rates, and improved chip clearance.
        - Use Three Flutes for highest feed rates.
  • Downcut End Mills prevent workpiece lifting, lessen burrs and top surface chipping, improves surface finish.
        - Single and Two Flutes for clean, burr free finish.
  • Standard and Metric Size End Mills.
  • Premium, Ultra-Fine, Nano Grade Solid Carbide for maximum tool strength and durability.
  • Manufactured in house with many tools in stock & ready to ship.
En Mills For Cutting Wood Provide Burr Free Finish


Call Us: (978)567-8867 or Contact Us if you have any questions.

Plastic and Wood Cutting End Mills

Plastic and Wood Cutting Square End Mills

Square End Mills

Extremely Sharp Cutting Edge Produces Excellent Surface Finish

 Single Flute End Mills Plastic and Wood Cutting

Single Flute
provides excellent surface finish and maximum chip clearance


See All Tool Bit Sizes
2 Flute End Mills Plastic and Wood Cutting

2 Flutes
provide excellent surface finish and allows for higher feedrates than Single Flute End Mills

See All Tool Bit Sizes
3 Flute End Mills Plastic and Wood Cutting

3 Flutes
provide excellent surface finish, allow for the highest feedrate but have less chip clearance than Single or 2 Flute End Mills

See All Tool Bit Sizes

Machine & Cut:

  • Plastic
  • Wood
Cutter Diameters: .050" - 1/2" and 1.5 mm - 6 mm
Plastic and Wood Cutting Ballnose End Mills

Ballnose End Mills

Extremely Sharp Cutting Edge Produces Excellent Surface Finish

 Single Flute Ballnose End Mills Plastic and Wood Cutting

Single Flute
provides excellent surface finish and maximum chip clearance


See All Tool Bit Sizes
 2 Flute Ballnose End Mills Plastic and Wood Cutting

2 Flutes
provide excellent surface finish and allows for higher feedrates than Single Flute End Mills

See All Tool Bit Sizes
 3 Flute Ballnose End Mills Plastic and Wood Cutting

3 Flutes
provide excellent surface finish and allow for the highest feedrate but have less chip clearance

See All Tool Bit Sizes

Machine & Cut:

  • Plastic
  • Wood

Cutter Diameters: .050" - 1/2" and 1.5 mm - 6 mm
Downcut End Mills for Cutting Plastic and Wood

Downcut End Mills

 20?helix flute pushes burrs downward to prevent workpiece lifting on vacuum chucks
Extremely sharp cutting edge allows high feedrates while producing an excellent surface finish

Single Flutes

Single Flute Downcut End Mill

See All Tool Bit Sizes
Two Flutes

2 Flute Downcut End Mill

See All Tool Bit Sizes

Machine & Cut:

  • Plastic
  • Wood
Cutter Diameters: 1/32" -  1/2" 1.5 mm - 6 mm






 

 

View Cart

 

 

Home Products Tech Help Policies Contact Us Site Map

Copyright © 2020, 2L inc.

bet007足球比分 bet36_12bet_bet356体育在线 bet007足球即时比分 bet官网体育12bet手机版官网bet亚洲娱乐场官网365bet体育必威bet体育